Expansion Joint Covers

  • Simple product names
  • Heavy 25UM anodising
  • Fewer joint systems with larger movement ranges - negates need for multiple types of joints = less joint wastage = $ saved for customer
  • Fixings/mechanical anchors provided = labour saved on sourcing fixings
  • Easy to read specification
  • Stainless steel centre bars - no rusting
  • Simple to install
  • Structural grade aluminium
  • Multiple anchor systems = fast installation

FLOOR EXPANSION JOINTS

Two Piece Slipper Plate

A two piece expansion joint system designed to be installed over minimal floor gaps, achieving minimal visual impact to the architectural floor finish.

Light Duty Floor Expansion Joint

The Light Duty Floor Joint has been designed for installations where concrete cutting to create a rebate is not permitted, where only a minimal rebate is available.

Medium Duty Floor Expansion Joint

Designed specifically for the retail industry, the Medium Duty Floor Expansion Joint is able to withstand pedestrian traffic to light vehicle traffic.

Heavy Duty Floor Expansion Joint

The Heavy Duty Floor Expansion Joint comes standard with heavy duty stainless steel cover plates and stainless steel centre bars.

Extra Heavy Duty Floor Expansion Joint

The Extra Heavy Duty Floor Joint accommodates extra large movement ranges of up to 120mm.

Carpet Floor Expansion Joint

With only a cover plate visible, the Carpet Floor Joint is designed to have a minimal visual impact and allows a smooth transition for pedestrians and retail service equipment to traverse in carpet floor applications.

Hospital Transition Floor Joint

Designed specifically for hospitals to enable trolley wheels to smoothly transition across the joint system. The Hospital Transition Floor Joint’s curved cover plate reduces noise and resistance when trolleys are traversing the joint.

Heard Group The Brass Series Expansion Joint Cover

The Brass Series

An alternate environmentally sustainable and more ethically sourced way to achieve the luxurious look of a brass finish compared to genuine brass, is The Brass Series.

Surface Seal

The Surface Seal 15 and 30 expansion joint has been designed specifically for installation in hospitals, aged care facilities, bathroom amenities and food service area floors, where there is a need to prevent water and contaminates from entering the expansion joint gap and to maintain a clean and hygienic environment.

Floor to Wall Expansion Joint Cover

Available in two standard sizes, the LFW and the MFW, these wall to floor expansion joints provide a solution where an expansion joint gap runs parallel with a wall or column allowing the continuity of the floor expansion joint systems.

POLISHED CONCRETE SERIES

Polished Concrete Series – Light Duty Floor Joint

Part of the Polished Concrete Series, the PCS - Light Duty Floor Joint, has been specifically designed for installation into polished concrete floors, after floor polishing has been completed. Able to accomodate movement ranges of up to 60mm the PCS - Light Duty Floor Expansion Joint Cover is available with a choice of 3mm thick heavy duty aluminium cover plates or 4mm thick stainless steel cover plates in either a mirror look finish or a grey sandblasted P5 grip certified finish.

Polished Concrete Series – Medium Duty Floor Joint

The Polished Concrete Medium Duty Floor Joint, has been specifically designed for installation into polished concrete floors, after floor polishing has been completed.

Polished Concrete Series – Extra Heavy Duty Floor Joint

The Polished Concrete Extra Heavy Duty Floor Joint, has been specifically designed for installation into polished concrete floors, after floor polishing has been completed.

TOPPING SLAB EXPANSION JOINTS

Heavy Duty Lifted All-thread Floor Joint

Designed specifically for use where there is a need to lift up an expansion joint for the purpose of a topping slab being installed over a structural slab, such as tile screed or a structural topping slab.

Medium Duty Continuous Angle Leg Floor Joint

Designed specifically for use where there is a requirement to lift up an expansion joint for the purpose of a topping slab being installed over a structural slab, such as tile screed or a structural topping slab.

WALL EXPANSION JOINTS

Floor to Wall Expansion Joint Cover

Available in two standard sizes, the LFW and the MFW, these wall to floor expansion joints provide a solution where an expansion joint gap runs parallel with a wall or column allowing the continuity of the floor expansion joint systems.

Heard Group Wall Panel Expansion Joint Cover

Wall Panel Expansion Joint

The Wall Panel Joint is an elegant solution designed to cover expansion joint gaps in interior or exterior walls and ceilings. Also available in an angle (corner) wall version for installation into wall corners.

HOSPITAL EXPANSION JOINTS

Hospital Transition Floor Joint

Designed specifically for hospitals to enable trolley wheels to smoothly transition across the joint system. The Hospital Transition Floor Joint’s curved cover plate reduces noise and resistance when trolleys are traversing the joint.

CAR PARK EXPANSION JOINTS

Extra Heavy Duty Floor Expansion Joint

The Extra Heavy Duty Floor Joint accommodates extra large movement ranges of up to 120mm.

CPSX™ Carpark Expansion Joint

The CPSX™ carpark expansion joint system has revolutionised carpark expansion joint installation for both retrofit and new construction offering a sustainable, water tight carpark expansion joint system that is installed flush in the expansion joint gap, departing from traditional metal armoured car park expansion joints that are surface mounted to the carpark deck with fixings.

PNSX™ Polymer Nosing

Heard Group PNSX™ Polymer Nosing System is a trowel-able epoxy mortar with excellent chemical and abrasion resistance providing a dense, impervious surface. It has been designed and produced specifically for use as a concrete repair system and to create an epoxy nosing on the end of a concrete slab, to prevent the slab from spooling when traversed by heavy vehicles. Ideal for roadways and carparks and as a concrete joint nosing for bridge expansion joints. It can also be used to repair spooled or broken concrete. As an elastomeric product, it will remain bonded to concrete slabs, unlike a cementitious product that will de-bond with thermal movement.

WATER AND FIRE SEALS

Epoxy Adhesive

Heard Group Epoxy Adhesive is an elastomeric epoxy bonder that performs as a lubricating adhesive during installation and once cured is a seal bonder with an elastomeric quality.

Heard Group Expansion Joint Water Seal

The Heard Group Expansion Joint Water Seal is a preformed cross-linked closed cell foam, specifically formulated to prevent water and debris from penetrating an expansion joint gap.

Heard Group Expansion Joint Fire Seal

PROMASEAL® FyreStrip is a highly compressible, flexible, fire resistant expansion strip seal which is used where movement joints are formed in the structure of a building.

EPOXY/CONCRETE REPAIRS

PNSX™ Polymer Nosing

Heard Group PNSX™ Polymer Nosing System is a trowel-able epoxy mortar with excellent chemical and abrasion resistance providing a dense, impervious surface. It has been designed and produced specifically for use as a concrete repair system and to create an epoxy nosing on the end of a concrete slab, to prevent the slab from spooling when traversed by heavy vehicles. Ideal for roadways and carparks and as a concrete joint nosing for bridge expansion joints. It can also be used to repair spooled or broken concrete. As an elastomeric product, it will remain bonded to concrete slabs, unlike a cementitious product that will de-bond with thermal movement.

Epoxy Adhesive

Heard Group Epoxy Adhesive is an elastomeric epoxy bonder that performs as a lubricating adhesive during installation and once cured is a seal bonder with an elastomeric quality.

Request a Brochure

By requesting a brochure you agree to be added to our Heard Group contact list.